Direct Drive Oil-lubricated Rotary Vane Vacuum Pump DRV10 with 10 m³/h
Technical Data
| | Units | DRV10 |
| Pumping Rate | 50 Hz | m³h-1 / Lmin-1 | 9.9/165 |
| 60 Hz | 12/200 |
| Ultimate Vacuum | Without gas ballast | Pa/ mbar | 0.5/5×10-3 |
| With gas ballast | 2/2×10-2 |
| Inlet | KF25/KF16 |
| Outlet | KF25 |
| Oil Needs | litre | 1.1 |
| Weight | kgs | 25 |
Performance Curve
Dimensions
DRV5 ［10 16］
Applications
- Mass spectrometry: In mass spectrometers, two-stage rotary vane pumps are used to create a high-vacuum environment in the ion source and the analyzer chamber. The vacuum is necessary to prevent the ions from colliding with air molecules, which could cause scattering and loss of the ion signal. A clean and stable vacuum environment is essential for accurate mass analysis and the identification of chemical compounds.
- Laboratory research: In various laboratory experiments, such as those involving gas-phase reactions, vacuum-based techniques, and the study of low-pressure phenomena, two-stage rotary vane pumps are commonly used. They provide a reliable and adjustable vacuum source for a wide range of experimental setups, allowing researchers to control the pressure and study the behavior of substances under different vacuum conditions.
